Thrust Restraints

THRUST RESTRAINTS

The horizontal thrust restraint shall consist of a spring element in series with a neoprene molded cup as described in specification 5 with the same deflection as specified for the mountings or hangers. The spring element shall be designed so it can be preset for thrust at the factory and adjusted in the field to allow for a maximum of 1/4” (6mm) movement at start and stop. The assembly shall be furnished with 1 rod and angle brackets for attachment to both the equipment and the ductwork or the equipment and the structure. Horizontal restraints shall be attached at the centerline of thrust and symmetrical on either side of the unit. Horizontal thrust restraints shall be type WBI/WBD as manufactured by Mason Industries, Inc.

Want to know more?

Want to know more? Use our information form to ask your specific question.

BULLETINS & DOCUMENTATION

HANGERS SPECIFICATIONS
(Hangers Piping Anchors and Guides – Specifications.doc, 393.50 KB)

WBI & WBD – DATA SHEET
(7 – DS-207S-2.pdf, 331.76 KB)

WBI SUBMITTAL
(Contact us for more info)

WBD SUBMITTAL
(Contact us for more info)

HAVE A SPECIFIC QUESTION?

RELATED PRODUCTS