Seismic Bracing

SEISMIC BRACING

Seismic Cable Restraints shall consist of galvanized steel aircraft cables sized to resist seismic loads with a minimum safety factor of two and arranged to provide all directional restraint. Cables must be pre-stretched to achieve a certified minimum modulus of elasticity. Cable end connections shall be steel assemblies that swivel to final installation angle and utilize two clamping bolts to provide proper cable engagement. Cables must not be allowed to bend across sharp edges. Cable assemblies shall have an OPA preapproval from OSHPD in the State of California verifying the maximum certified load ratings. Cable assemblies shall be type SCB at the ceiling and at the clevis bolt, SCBH between the hanger rod nut and the clevis or equipment, or SCBV if clamped to a beam, all as manufactured by Mason Industries, Inc.

Want to know more?

Want to know more? Use our information form to ask your specific question.

BULLETINS & DOCUMENTATION

HANGERS SPECIFICATIONS
(Hangers Piping Anchors and Guides – Specifications.doc, 393.50 KB)

SEISMIC SWAY BRACE SYSTEM – DATA SHEET
(DS-602-3.pdf, 425.88 KB)

SAS, SASE, SAST, SRA – DATA SHEET
(6 – DS-213-1.1.pdf, 256.59 KB)

CCB – SUBMITTAL
(CCB.pdf, 1.15 MB)

PCCB – SUBMITTAL
(Contact us for more info)

SCBA – SUBMITTAL
(Contact us for more info)

SRC – SUBMITTAL
(SRC.pdf 1.04 MB)

SCB – SUBMITTAL
(SCB.pdf, 858.37 KB)

SCBH – SUBMITTAL
(SCBH.pdf, 564.11 KB)

SCBV – SUBMITTAL
(SCBV.pdf, 1.21 MB)

SSBS – SUBMITTAL
(SSBS.pdf, 405.28 KB)

SSB – SUBMITTAL
(SSB.pdf, 634.16 KB)

SHB – SUBMITTAL
(Contact us for more info)

SFB – SUBMITTAL
(Contact us for more info)

JAH – SUBMITTAL
(JAH.pdf, 545.73 KB)

UCC – SUBMITTAL
(UCC.pdf, 564.30 KB)

SLDB – SUBMITTAL
(SLDB.pdf, 1.15 MB)

SAS & SASE – SUBMITTAL
(SAS & SASE.pdf, 400.53 KB)

SAST – SUBMITTAL
(SAST.pdf, 496.71 KB)

HAVE A SPECIFIC QUESTION?

RELATED PRODUCTS