ULCPS

SS Braided Hose with Copper Female Sweat Ends U.L. Approved for Refrigerant Service Stainless Steel Flexible Connectors contribute to the solution of vibration, noise, expansion and offset motion problems in piping systems. Assemblies are designed for both high and low temperatures, as well as high pressure and full vacuum. Stock sizes include 1/2” (13mm) through…

CPSB-NSF

Braided Bronze Hose with Copper Sweat Ends Stainless Steel Flexible Connectors contribute to the solution of vibration, noise, expansion and offset motion problems in piping systems. Assemblies are designed for both high and low temperatures, as well as high pressure and full vacuum. Stock sizes include 1/2” (13mm) through 16” (400mm) pipe diameter. Temperature ranges…

CPSB-MG

CPSB-MG Copper Lines have virtually no stiffness or mass. We are recommending our longest standard lengths primarily for offset, not vibration reduction. Consult factory with full location description as well as service conditions for higher pressure or temperature applications. Tubing Size & End to End (mm) Live Length (mm) Corru- gations per foot Maximum Permanent Lateral…

CPSB

Braided Bronze Hose with Copper Sweat Ends Copper Lines have virtually no stiffness or mass. We are recommending our longest standard lengths primarily for offset, not vibration reduction. Consult factory with full location description as well as service conditions for higher pressure or temperature applications. Tubing Size & End to End (in) Live Length (in)…

CSAWN

Braided Hose with Carbon Steel Weld Nipples Stainless Steel Flexible Connectors contribute to the solution of vibration, noise, expansion and offset motion problems in piping systems. Assemblies are designed for both high and low temperatures, as well as high pressure and full vacuum. Stock sizes include 1/2” (13mm) through 16” (400mm) pipe diameter. Temperature ranges…

GWN & GWN-UL

SS Braided Hose with Carbon Steel Grooved Nipples Sizes in RED are Minimum Recommended Lengths at Equipment Connections to Reduce Vibration Transmission. GWN Pipe Size & End to End (in) Live Length (in) Corrugations per foot Maximum Permanent Lateral Offset (in) 2 X 14 83/4 58 1 2 X 24 183/4 33/4 2 X 36…

GWNF & GWNF-UL

SS Braided Hose with Carbon Steel Grooved Weld Nipple and Flange Safety Factor is 4X Rated Pressure. Full Vacuum Rating— 30” 762mm Hg GWNF Pipe Size & End to End (in) Live Length (in) Corrugations per foot Maximum Permanent Lateral Offset (in) 2 x 13 91/8 58 1/4 21/2 X 13 83/8 48 3 x 13…

RFFL

SS Reducer with Carbon Steel Fixed & Floating Flanges RFFL published lengths are based on live engths presently the industry standard for pump connectors, which we feel are too short. We are physically testing transverse stiffness and in the near future will increase live lengths based on our research. Pipe Size Large End X Small End (in)…

CSAFFL

CSAFFL These assemblies have been “CSA” approved for use on gas pipelines. “CSA” is the current certification agency for gas industry products, assuming the authority formerly associated with the American Gas Association (AGA). Pipe Size (in) MN End to End (in) WN End to End (in) Live Length (in) Corru- gations per foot Maximum Permanent…

FFLSS & FFLSS-NSF

FFLSS – SS Braided Hose with Stainless Steel Fixed & Floating Flanges FFL Braided Stainless Steel Hose has fixed and floating raised face flanges. Years ago, almost all stainless steel hose was manufactured with a floating flange on one end. It is still important because it makes lining up the holes easier during installation, and…